Only logged in customers who have purchased this product may leave a review.
Clemlite® Lined Metal Jacketed Long Venturi
A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle’s inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear.
Long Venturi: SFD, SMD, SSD, SXD
Requirements for Operation
Nozzles are sized by the diameter of their orifices in 1/16-inch increments. A No. 2 nozzle has a 2/16-inch (1/8-inch) orifice, a No. 3 nozzle has a 3/16-inch orifice, etc. The size of the nozzle orifice determines abrasive and air consumption. Air consumption is measured in cubic feet per minute (cfm) at a given pressure.
When choosing a nozzle, consider the amount of available air in cfm, the capacity of the blast machine and the inside diameter of the piping, and the blast and air hoses. For optimal performance, these elements must be compatibly sized.
If too large a nozzle is used, low blast pressure and rapid wear on the blast hose will occur. If too small a nozzle is used, smooth media flow will be difficult to achieve.
Description of Operation
The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.
With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.
The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.
Advantages
- Expected life with expendable abrasives is up to 500 hours
- Durable metal jacket
- Non-binding contractor threads
- 42% lighter than tungsten carbide
Replacement Parts
For flanged nozzle use coupling lock-springs
(25)…………………………21585
Nozzle Stock Number, Dimensions and Weights
|
Model No.
|
Stock No.
|
Orfice ID
|
Length
|
Net Wt.
|
Pkg’d Wt.
|
|
| Flanged | SFD-6 | 01623 | 3/8″ | 6-7/8″ | 1.1 lb | 1.5 lb |
| SFD-7 | 01624 | 7/16″ | 8-1/16″ | 1.2 lb | 2 lb | |
| SFD-8 | 01625 | 1/2″ | 9-1/4″ | 1.3 lb | 2 lb | |
| Contractor Thread | SMD-3 | 04520 | 3/16″ | 4-5/16″ | .70 lb | 1 lb |
| SMD-4 | 04521 | 1/4″ | 5-7/16″ | .80 lb | 1 lb | |
| SMD-5 | 04522 | 5/16″ | 5-7/8″ | .80 lb | 1 lb | |
| SMD-6 | 04523 | 3/8″ | 6-3/4″ | .90 lb | 1 lb | |
| SMD-7 | 04524 | 7/16″ | 8″ | 1 lb | 1 lb | |
| SMD-8 | 04525 | 1/2″ | 9″ | 1 lb | 1 lb | |
| Fine 1-1/4″ Thread | SSD-3 | 01617 | 3/16″ | 4-5/16″ | .60 lb | 1 lb |
| SSD-4 | 01618 | 1/4″ | 5-7/16″ | .60 lb | 1 lb | |
| SSD-5 | 01619 | 5/16″ | 5-13/16″ | .70 lb | 1 lb | |
| SSD-6 | 01620 | 3/8″ | 6-13/16″ | .80 lb | 1 lb | |
| SSD-7 | 01621 | 7/16″ | 7-15/16″ | 1.1 lb | 1.5 lb | |
| SSD-8 | 01622 | 1/2″ | 9″ | 1.3 lb | 1.5 lb | |
| Contractor Thread | SXD-6 | 04592 | 3/8″ | 6-13/16″ | 1 lb | 1.5 lb |
| SXD-7 | 04593 | 7/16″ | 8-1/16″ | 1.2 lb | 1.5 lb | |
| SXD-8 | 04594 | 1/2″ | 9-3/16″ | 1.3 lb | 1.5 lb |
Need Help?
Fill out the form below if you have any questions about what abrasive you should use or how to use it. We are here to help regardless of the size of your order or business.Interesting links
Here are some interesting links for you! Enjoy your stay :)Pages
- Abrasive Blast Hose
- Abrasive Blasting
- Abrasives
- Abrasives
- All Parts
- Alloy Additions
- Aluminum Oxide Abrasives
- BCP
- Bio Blast
- Blast It All
- Blast Nozzles
- Blasting Abrasives
- Blasting Nozzles
- Blasting Parts and Equipment
- Boride
- Bullard
- Code Of Conduct
- Commercial Sandblasters & Other Blast Equipment
- Compressed Air And Abrasive Consumption
- Copper Master Alloys
- Customer Satisfaction Survey
- Filters
- Home – NT Ruddock Home
- Industrial Sandblaster & Sandblasting Equipment
- Industries Served
- Ingot
- Knowledge
- Master Alloys
- Media Blasting
- Metals
- PolyCut WaterJet Garnet
- Privacy Policy
- Professional Sandblaster For Sale | Attain Reliable Blasting
- Pure Metals
- Rentals
- Request a Quote
- Request Quote
- Return Policy
- Safety Products
- Sand Blast Cabinets
- Sand Blasting Sand
- Sandblast Media
- Sandblasting Equipment
- Sandblasting Equipment & Parts
- Sandblasting Equipment Supplier
- Sandblasting Media
- Sandblasting Pots
- Sandblasting Supplies
- Schmidt
- Scrap Metals
- Service Request
- Shop
- Sitemap
- Store
- Technical Support
- Walnut Shells
- Waterjet Nozzles
- Products
- Services
- About
- Contact
- My Account
- Cart
- Checkout
- Terms & Conditions
- FAQs








Reviews
There are no reviews yet.